Flow Divider Valve
BH-DV/BH-DRV SERIES – Flow Control Valve with and without Reverse Flow
Key Highlights
- Standard Sizes : 06, 08, 10, 12, 16
- Max Pressure upto 350 bar [STD],
- Salt spray life upto 2000 hrs, Suitable for
extreme corrosive atmosphere - Brand your company with bulk orders
- 6 Sigma Quality Management, Count on us
- Function & Features
- Technical Specification
- Diagram & Dimension
The BH-DV is an inline mounted flow control valve which controls the flow by adjusting the flow regime. The flow rate is therefore dependent on the pressure differential and viscosity. Starting with the throttle spindle in the fully closed position, the flow rate increases in-accordance with the appropriate curve as the control knob is turned. The flow is controlled in both directions. The scale on the lower edge of the control knob enables repeatedly. The BH-DRV is a flow control valve in the same design which also allows the same fine flow adjustment, but in one direction only. reverse flow is restricted due to built-in check valve.
BH-DV
BH-DRV
up to 180 l/min
Features
- For adjusting the speed of actuators
- For fine adjustment and stopping
- For system damping of hydraulic circuits
- To release pressure from accumulator systems
- Used as an emergency drain for lowering a load
- An Allen set-screw locks the locking of the knob
- Choice of five sizes ensures best possible adaptability
to the system
